HKS HIPERMAX S FULL COIL-OVER KIT : NISSAN 350Z (Z33) / NISSAN SKYLINE (CPV35)
SKU HKS-80300-AN010
AU$3 450.00
In stock
1
Save this product for later
HKS HIPERMAX S FULL COIL-OVER KIT : NISSAN 350Z (Z33) / NISSAN SKYLINE (CPV35)
Product Details
UPC: 80300-AN010
Brand: HKS
Code No. 80300-AN010
Going beyond just ride comfort or handling performance, a new standard of "Driving Comfort" aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.
※The above photo is an item for Z34.
The model in the photo is Z33.
Application
| Engine | VQ35HR |
|---|---|
| Model Year | 07/02 - 08/11 |
| Remarks | Fairlady Z Roadster is not compatible as it has not been tested. |
The model in the photo is CPV35.
Application
| Engine | VQ35DE |
|---|---|
| Model Year | 03/01 - 07/09 |
| Remarks |
Specification
| FRONT | REAR | |
|---|---|---|
| Damping force adjustment | 30 steps | 30 steps |
| Base valve | - | - |
| Height adjustable lower bracket | 〇 | 〇 |
| Upper mount | Rubber | Rubber |
| Inverted/Normal type | Normal | Normal |
| Damper/Spring layout | Coilover | Separated |
| Spring rate change at factory | Possible | Impossible |
| Damping force adjustment with wire | - | 〇 |
| Helper spring (Spring rate N/mm) |
〇 (19.8) | - |
Ride Height mm
| Factory *2 | Test data | Adjustable range High - Low *3 |
Drivable range High - Low *4 |
||
|---|---|---|---|---|---|
| FRONT | Ride height *1 | 683 | ← | 694 ～ 649 | 694 ～ 649 |
| Against stock | -12 | ← | -1 ～ -46 | -1 ～ -46 | |
| REAR | Ride height *1 | 684 | ← | 698 ～ 649 | 698 ～ 649 |
| Against stock | -15 | ← | -1 ～ -50 | -1 ～ -50 |
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.
Kit information
Spring of Full Kit
| F | R | |
|---|---|---|
| Spring rate N/mm(kgf/mm) | 98 ( 10.0 ) | 88 ( 9.0 ) |
| Free height (mm) | 220 | - |
| Spring type | Straight Barrel type | Special shape |
| Recommended range to change spring rate N/mm(kgf/mm) | +20 ( 2 ) | - |
Specification of damper
| F | R | |
|---|---|---|
| Damping force (Rebound/Damping)N* | 1015 / 432 | 579 / 319 |
| Default position of dial | 15 | 15 |
| Remaining damper stroke (Rebound/Damping)mm | 47 / 52 | 68 / 68 |
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
| F | R | |||||||
|---|---|---|---|---|---|---|---|---|
| Default | Test | Drivable limit High * |
Drivable limit Low * |
Default | Test | Drivable limit High * |
Drivable limit Low * |
|
| Length of case (mm) |
479 | ← | 479 | 479 | 331 | ← | 343 | 319 |
| Spring Set length(mm) |
246 | ← | 239 | 268 | - | - | - | - |
| Length to ride hight adjuster (mm) |
34 | ← | 41 | 12 | 43 | ← | 52 | 21 |
| Lever ratio | 1.54 | 1.59(spg) , 1.18(dmp) | ||||||
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.
Test vehicle information
| F | R | ||
|---|---|---|---|
| Vehicle weight kg | 838 (780) | 685 (670) | |
| Tire size (Air pressure) kPa | 235 / 40 - 19 ( 240 ) | 265 / 35 - 19 ( 240 ) | |
| Wheel size | 9.0 JJ × 19 inset 35 | 10.0 JJ × 19 inset 35 | |
| Alignment (Toe/Camber) |
Test data | out 1 mm / -1°06' | in 2 mm / -1°55' |
| Standard value | in 1 ± 1 mm / -0°40' ± 0°45' | in 1.9 ± 0.8 mm / -1°35' ± 0°30' |
* Test data at HKS.
Parts List * It may be changed without prior notice.
Point
MAX4GT has been reviewed and renewed to make it easier to handle and more versatile.
The front rate has been increased by 1K to provide better
cornering performance than before. We aim to provide a properly supple
driving experience.
Both front and rear are equipped with PVS and high flow rate
needle, and the synergistic effect of these two elements quickly boosts
damping force in the necessary areas and cuts off the unnecessary
movements. The damping force is precisely controlled to provide a stable
and comfortable ride quality.
Even though helper springs have been equipped to the front to
provide sufficient stroke on the extension side, as well as a sufficient
ride height adjustment range, in order to surpass the previous one
which had a slight height adjust amount
The rear damping adjustment dial used to be set on the tire
side, but this time we have significantly reviewed the components and
changed it to an upright type that makes it easier to adjust the
damping.
By doing some interior cutting, it is easier to adjust the
damping adjustment directly via wires making it easier to use in
different situations.
It is recommended for a wide range of users, from street driving to winding roads and track.
※Test vehicle was tested by replacing the front lower arm with a
new stock one. We recommend that you check the condition of the front
arm bushings for cracks when installing the product in order to maximize
the potential of the vehicle.
※The FAIRLADY Z ROADSTER is not compatible because the
installation has not been checked. Thank you for your understanding.
IMAGE DISCLAIMER : Images displayed may not represent the actual product and are used for descriptive purposes only.
Display prices in:AUD
